立即開始

在腳本中搜尋"ma cross"

MBY_Predict Ma CrossGood morning. This is MBY Lab. This indicator calculates the conditions for the intersection of two different moving average lines. What the "Point" value means is the price at which the moving average line with different opening and closing prices for today or tomorrow crosses. Traders can use this indicator to predict the conditions in which Golden Cross or Dead Cross will or will not occur in the future. This indicator is an open indicator and anyone can use it.
Pine Script®指標
由Yonggg92提供
3
HFT Momentum IndicatorDefault Settings are meant to be used in XBT/USD chart on 1 hour time frame. If you want to use for another asset on another time frame YOU MUST CHANGE THE SETTINGS This is momentum-based strategy designed by HFT Research in order to take advantage of volatile, trending markets. Use ADX ADX stands for average directional index . It is an indicator that measures volatility in the market. Unfortunately, the worst market condition for this strategy is sideways market. ADX becomes a useful tool since it can detect trend. If the volatility is low and there is no real price movement, ADX will pick that up and will not let you get in trades during a sideways market. It will allow you to enter trades only when the market is trending. Use MA CrossOver This strategy’s main driver is the moving average cross over however, unlike many other indicators, this strategy has ALL the moving averages that are on trading view. Total of 13 different moving averages all calculated in a different fashion available in a drop-down menu. You are able to choose two different moving averages to cross for your entry as well as being able to adjust the length of each individual moving average. Use MA Spread % Filter As an extra protection, we introduced MA spread % filter. We all know that momentum strategy works when there is actually a trend that has momentum. When there is no trend and market side choppy, we get a lot of noisy signals. In order to battle that we have introduced MA spread % filter. Using this piece of setting, you will be able to chose how strong the cross over actually is. If price is moving sideways, the moving averages will cross each other barely. If the price has actually any steam and momentum, MA 1 will cross over MA 2 aggressively because it will be trending market. First you chose what the minimum % difference there should be between your 2 moving averages. If you keep this too tight, it won’t be as useful and if you keep this too large then the script will not generate any signals. Trust us, there is a fine balance in between! Then you proceed to chose your moving averages that the bot should keep track of. Check our website for more information.
Pine Script®指標
由HFTResearch提供
2
How to avoid repainting when NOT using security()Even when your code does not use security() calls, repainting dynamics still come into play in the realtime bar. Script coders and users must understand them and, if they choose to avoid repainting, need to know how to do so. This script demonstrates three methods to avoid repainting when NOT using the security() function. Note that repainting dynamics when not using security() usually only come into play in the realtime bar, as historical data is fixed and thus cannot cause repainting, except in situations related to stock splits or dividend adjustments. For those who don’t want to read Configure your alerts to trigger “Once Per Bar Close” and you’re done. For those who want to understand Put this indicator on a 1 minute or seconds chart with a live symbol. As price changes you will see four of this script’s MAs (all except the two orange ones) move in the realtime bar. You are seeing repainting in action. When the current realtime bar closes and becomes a historical bar, the lines on the historical bars will no longer move, as the bar’s OHLC values are fixed. Note that you may need to refresh your chart to see the correct historical OHLC values, as exchange feeds sometimes produce very slight variations between the end values of the realtime bar and those of the same bar once it becomes a historical bar. Some traders do not use signals generated by a script but simply want to avoid seeing the lines plotted by their scripts move during the realtime bar. They are concerned with repainting of the lines . Other traders use their scripts to evaluate conditions, which they use to either plot markers on the chart, trigger alerts, or both. They may not care about the script’s plotted lines repainting, but do not want their markers to appear/disappear on the chart, nor their alerts to trigger for a condition that becomes true during the realtime bar but is no longer true once it closes. Those traders are more concerned with repainting of signals . For each of the three methods shown in this script’s code, comments explain if its lines, markers and alerts will repaint or not. Through the Settings/Inputs you will be able to control plotting of lines and markers corresponding to each method, as well as experiment with the option, for method 2, of disabling only the lines plotting in the realtime bar while still allowing the markers and alerts to be generated. An unavoidable fact is that non-repainting lines, markers or alerts are always late compared to repainting ones. The good news is that how late they are will in many cases be insignificant, so that the added reliability of the information they provide will largely offset the disadvantages of waiting. Method 1 illustrates the usual way of going about things in a script. Its gray lines and markers will always repaint but repainting of the alerts the marker conditions generate can be avoided by configuring alerts to trigger “Once Per Bar Close”. Because this gray marker repaints, you will occasionally see it appear/disappear during the realtime bar when the gray MAs cross/un-cross. Method 2 plots the same MAs as method 1, but in green. The difference is that it delays its marker condition by one bar to ensure it does not repaint. Its lines will normally repaint but its markers will not, as they pop up after the condition has been confirmed on the bar preceding the realtime bar. Its markers appear at the beginning of the realtime bar and will never disappear. When using this method alerts can be configured to trigger “Once Per Bar” so they fire the moment the marker appears on the chart at the beginning of the realtime bar. Note that the delay incurred between methods 1 and 2 is merely the instant between the close of a realtime bar and the beginning of the next one—a delay measured in milliseconds. Method 2 also allows its lines to be hidden in the realtime bar with the corresponding option in the script’s Settings/Inputs . This will be useful to those wishing to eliminate unreliable lines from the realtime bar. Commented lines in method 2 provide for a 2b option, which is to delay the calculation of the MAs rather than the cross condition. It has the obvious inconvenient of plotting delayed MAs, but may come in handy in some situations. Method 3 is not the best solution when using MAs because it uses the open of bars rather than their close to calculate the MAs. While this provides a way of avoiding repainting, it is not ideal in the case of MA calcs but may come in handy in other cases. The orange lines and markers of method 3 will not repaint because the value of open cannot change in the realtime bar. Because its markers do not repaint, alerts may be configured using “Once Per Bar”. Spend some time playing with the different options and looking at how this indicator’s lines plot and behave when you refresh you chart. We hope everything you need to understand and prevent repainting when not using security() is there. Look first. Then leap.
Pine Script®指標
由PineCoders提供
27
Mr Anderson Simple Moving Average Strategy with Bend10This script is based on Mr. Anderson's (also known as TrueCrypto28 on twitter) 10/20 Day SMA trading strategy. This is the extended strategy which includes the Heikin Ashi candle addition, and also the Bend10 strategy. Full explanation of strategy can be found on this thread: twitter.com I believe there is a paid version of this indicator, but I believe it looks a bit messy, and does not include the Bend10 addition. This version is free, less cluttered (my opinion), includes the Bend10 indicator flags, and also changes the background to show where the MAs cross. Default indicator values align with Mr. Anderson's strategy. You can switch timeframes and it will remain based on the 1D unless you change it in the settings. Indicator is based on the Heikin-Ashi candles, but you do not need to have these candles active for the indicator to work. It will work regardless of what candles you use. EXPLANATION OF INDICATOR: - "long" + green up arrow is printed when all of the long conditions are met ---> this is where you would enter a long trade - green 'X' is printed when the long cover condition is met (HA candle flips red/price drops below 10d SMA/bearish SMA cross) ---> this is where you would exit your long trade - "short" + red down arrow is printed when all of the short conditions are met ---> this is where you would enter a short trade - red 'X' is printed when one of the short cover conditions are triggered (HA candle flips green/price goes above 10d SMA/bullish SMA cross) ---> this is where you would exit your short trade - green 'B' is printed when the BEND10 long condition is met (bearish trending 10d SMA starts bending, price breaks above 10d SMA, and HA candle flips from red to green) ---> this is where you CAREFULLY consider going long. This flag is to catch big pumps earlier than the long signals. If you do make an entry here, it is advised that you keep a tight stop loss, and take profits when the price reaches the 20d SMA - The background color for a candle is red when there is a bearish MA cross (fast beneath slow) - The background color for a candle is green when there is a bullish MA cross (fast above slow)
Pine Script®指標
由number_juan提供
7
50, 100, 200 Moving AverageFree to use Moving Average indicator for 50, 100 and 200 days. Smooths out the price across each period to reveal short, medium and long term trends and their relationship to each other. In principal, when the price is above a moving average the trend is up, when the price is below a moving average the trend is down. When a short term MA crosses above a long term MA (a "golden cross") it is a strong buy signal. Conversely when a short term MA crosses below a long term MA (a "death cross") it is a strong sell signal. Note that Moving Averages represent historical data and therefore are not strictly predictive in nature, but show trends that may be in action. Notably the 200 day MA will often be respected as support or resistance. This tool is for educational purposes only and not a recommendation to buy or sell. Always do your own research before trading. Best wishes, BCryptological
Pine Script®指標
由BCryptological提供
13
Multi-MA CrossingDesigned/back-tested for daily BTC/USD closing price. Your mileage may vary for other assets/time frames. By default includes 13 EMA, 21 SMA, 49 EMA, 200 EMA. Crosses of 13 / 49 EMA are for buy/sell signals. 13 EMA / 21 SMA cross-unders are for sell signals near local tops. EMA periods are editable. See text in the Pine Editor for additional notes on the indicators. Combine with oscillators for more rapid identification of reversals. Feel free to comment, would be happy to discuss. Good luck! -JDH
Pine Script®指標
由jodahy提供
Multi-MA CrossingDesigned/back-tested for daily BTC/USD closing price. Your mileage may vary for other assets/time frames. By default includes 13 EMA, 21 SMA, 49 EMA, 200 EMA. Crosses of 13 / 49 EMA are for buy/sell signals. 13 EMA / 21 SMA cross-unders are for sell signals near local tops. EMA periods are editable. See text in the Pine Editor for additional notes on the indicators. Combine with oscillators for more rapid identification of reversals. Good luck! -JDH
Pine Script®指標
由jodahy提供
CNS - Multi-Timeframe Bollinger Band OscillatorMy hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. I’ve been having good results setting the “Bollinger Band MA Length” in the Input tab to between 5 and 10. You can use the standard 20 period, but your results will not be as granular. This indicator has proven very good at finding local tops and bottoms by combining data from multiple timeframes. Use BB timeframes that are lower than the timeframe you are viewing in your price pane. The default settings work best on the weekly timeframe, but can be adjusted for most timeframes including intraday. Be cognizant that the indicator, like other oscillators, does occasionally produce divergences at tops and bottoms. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script®指標
由chicagonativeson提供
Multi-Timeframe Bollinger BandsMy hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. I’ve been having good results setting the “Bollinger Band MA Length” in the Input tab to between 5 and 10. You can use the standard 20 period, but your results will not be as granular. This indicator has proven very good at finding local tops and bottoms by combining data from multiple timeframes. Use timeframes that are lower than the timeframe you are viewing in your price pane. Be cognizant that the indicator, like other oscillators, does occasionally produce divergences at tops and bottoms. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script®指標
由chicagonativeson提供
Multi-Timeframe Bollinger Band PositionBeta version. My hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation: 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example: If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes: The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script®指標
由chicagonativeson提供
MARibbonMARibbon インジケーターについて この「MARibbon」は、3本の移動平均線（MA1、MA2、MA3）を描画し、特にMA2とMA3の関係性に注目して、背景色でトレンドの強弱や転換のサインを視覚的に分かりやすく表示するインジケーターです。 主な特徴 3種類の移動平均線を表示可能 MA1（白色、期間40、太さ2） MA2（水色、期間200、太さ4） MA3（ピンク色、期間800、太さ4） 各MAの期間・種類（SMA、EMA、WMA、RMA）・タイムフレームは自由に設定可能。 MA2とMA3の関係性に応じて、チャート背景に色付きのリボン（帯）を表示。 背景リボンの意味 MA2 > MA3（ゴールデンクロス状況） → 背景を薄い緑色にして、上昇トレンドの可能性を示唆。 MA3 > MA2（デッドクロス状況） → 背景を薄い赤色にして、下降トレンドの可能性を示唆。 それ以外（等しい場合など）は背景色なし（透明）で表示。 入力可能な設定 各移動平均線の期間 各移動平均線の種類（SMA、EMA、WMA、RMA） 各移動平均線のタイムフレーム（デフォルトはチャートと同じ） 使い方 任意の銘柄・時間足のチャートにインジケーターを適用。 必要に応じて、3本の移動平均の期間・種類・時間足を調整。 MA2とMA3の位置関係によって、チャート背景の色が変わり、トレンドの強弱を直感的に把握可能。 MARibbon is a custom indicator that plots three moving averages (MA1, MA2, MA3) and visually fills the space between MA2 and MA3 with color bands to indicate trend strength and direction. Each MA supports custom type (SMA / EMA / WMA / RMA), length, and timeframe. A green band appears when MA2 is above MA3. A red band appears when MA3 is above MA2. This clean and minimal design helps traders easily visualize overlapping trends and potential crossovers. 💡 Use Cases: Visually confirm confluence of long- and short-term trends Identify ribbon-like zones of trend strength Support for MA cross strategy analysis
Pine Script®指標
由shionn777_13提供
Bitcoin Pi Cycle Top Indicator - Daily Timeframe Only1 Day Timeframe Only The Bitcoin Pi Cycle Top Indicator has garnered attention for its historical effectiveness in identifying the timing of Bitcoin's market cycle peaks with remarkable precision, typically within a margin of 3 days. It utilizes a specific combination of moving averages—the 111-day moving average and a 2x multiple of the 350-day moving average—to signal potential tops in the Bitcoin market. The 111-day moving average (MA): This shorter-term MA is chosen to reflect more recent price action and trends within the Bitcoin market. The 350-day moving average (MA) multiplied by 2: This longer-term MA is adjusted to capture broader market trends and cycles over an extended period. The key premise behind the Bitcoin Pi Cycle Top Indicator is that a potential market top for Bitcoin can be signaled when the 111-day MA crosses above the 350-day MA (which has been doubled). Historically, this crossover event has shown a remarkable correlation with the peaks of Bitcoin's price cycles, making it a tool of interest for traders and investors aiming to anticipate significant market shifts. #Bitcoin
Pine Script®指標
由tradepsych提供
2
[blackcat] L4 Adaptive Hull Suite 4HLevel: L4 Function Description: The L4 Adaptive Hull Suite 4H aims to help traders identify trend reversals and trade signals using various moving averages and indicators. The script is designed to be adaptable and customizable, allowing traders to tweak the settings to suit their individual preferences and trading styles. At its core, the script uses the hybrid Hull Moving Average (HHMA), a popular technical indicator that aims to reduce lag and noise while improving the accuracy of moving average signals. The HHMA is combined with a reverse chop indicator, which helps identify trend reversals by measuring the volatility of the market and comparing it to a set threshold. In addition to the HHMA and reverse chop indicators, the script also includes customized open-close cross (OCC) conditions and a hybrid Hull Moving Average (Hybrid Hull MA). The OCC conditions allow traders to generate buy and sell signals based on the cross of the open and close prices, while the hybrid Hull MA combines the HHull MA with other moving averages to provide a more accurate and reliable trend-following signal. Traders can adjust the settings of the script to suit their trading style and risk appetite. For instance, the chop length, ATR length, and reverse chop threshold can be customized to identify trend reversals more accurately, while the Hull MA length can be adjusted to provide a faster or slower response to price changes. Overall, the L4 Adaptive Hull Suite 4H is a powerful and flexible Pine script that can help traders identify trend reversals and generate accurate buy and sell signals. With its customizable settings and reliable indicators, the script can be a valuable addition to any trader's toolkit. About Time Frame: The L4 Adaptive Hull Suite 4H is specifically designed for use on the 4-hour time frame and is particularly well-suited for trading the BTCUSDT.P trading pair. The script combines various technical indicators, including the Adaptive Hull Moving Average (AHMA) and the reverse chop indicator, to help identify trend reversals and generate accurate buy and sell signals. Traders who are interested in using the L4 Adaptive Hull Suite 4H should be aware that it is optimized for use on the 4-hour time frame. While it may work on other time frames, the signals generated may not be as reliable as those generated on the 4-hour chart. Additionally, the script is specifically designed for use on the BTCUSDT.P trading pair, and may not be as effective on other trading pairs. Overall, the L4 Adaptive Hull Suite 4H is a powerful and adaptable Pine script that can help traders identify trend reversals and generate accurate buy and sell signals. With its focus on the 4-hour time frame and the BTCUSDT.P trading pair, the script can be a valuable tool for traders who are looking to improve their trading results on this particular asset. Choppiness Sensitive The L4 Adaptive Hull Suite 4H includes a choppiness detection feature that helps traders identify whether the market is trending strongly or moving sideways. When the market is trending strongly, the background color of the chart will turn blue, indicating an active buy or sell signal. Conversely, when the market is moving sideways, the script will ignore any buy or sell signals generated by the OCC or Hull MA conditions. The choppiness detection feature is based on the reverse chop indicator, which measures the volatility of the market and compares it to a set threshold. When the chop value is above the threshold, the market is considered to be in a sideways or choppy phase, and the script will not generate any buy or sell signals. However, when the chop value is below the threshold, the market is considered to be trending strongly, and the script will generate active buy or sell signals based on the OCC or Hull MA conditions. Overall, the choppiness detection feature is a valuable addition to the L4 Adaptive Hull Suite 4H, as it helps traders identify the optimal times to enter and exit the market. By focusing on strong trends and ignoring sideways movement, traders can improve their trading results and minimize their risk of losses. Divergence Detection and Alerts The L4 Adaptive Hull Suite 4H is a powerful Pine script that can produce divergence labels and TradingView alerts using the built-in alert() function. This allows traders to receive real-time notifications when the script generates a buy or sell signal, making it easier to stay on top of market movements and take advantage of profitable trading opportunities. To set up alerts, traders can simply add the alert() function to the script and specify the conditions that should trigger the alert. For instance, traders may want to receive an alert when the script generates a buy signal based on the OCC conditions, or when the Hull MA crosses above or below a certain level. In addition to alerts, the script can also produce divergence labels, which can help traders identify potential trend reversals and generate more accurate buy and sell signals. Divergence labels are based on the difference between the script's indicators and the price action of the asset being traded, and can provide valuable insights into the underlying market dynamics. Overall, the L4 Adaptive Hull Suite 4H is a versatile and customizable script that can help traders identify trend reversals and generate accurate buy and sell signals. With its ability to produce alerts and divergence labels, the script can be a valuable tool for traders who are looking to stay on top of market movements and take advantage of profitable trading opportunities.
Pine Script®指標
由blackcat1402提供
23
Actieve Inversiones EMABBOL by EDOHEN EMABBOL includes these indicators: - triple emas (9,21,50) - Bollinger Bands - Also includes buying or selling signals The following strategy is based on ema crosses and bollinger ma crosses, the Bollinger band gives us the target we could expect from our trades, using the upper and lower bands. Trading criteria Buy : Price crosses over the triple emas and also crosses under the Bollinger band ema. Looking for 3:1 PnL Sell : Price crosses under the triple emas and also crosses under the Bollinger band ema. Looking for 3:1 PnL Stop Loss Tips : set the SL above the crosses if Selling, below the crosses if buying Take Profit Tips : set the TP below the Bollinger's lower Band band if Selling, or above the Bollinger's upper Band band if Buying
Pine Script®指標
由Jesus_Salvatierra提供
Fibonacci Muti-MA RibbonWelcome some, welcome small.... This is CryptoFilio, your dark knight in the crypto light - shining down my infinite wisdom upon this wasteland we call the "markets". It's me and you against the machine... so rage, rage, rage against the dying of the night! DESCRIPTION This indicator exemplifies the beauty of the sacred Fibonacci sequence.... used by flowers and seashells and the intrepid day trader. Each color in the ribbon represents an MA of a specific FIB lookback period. This naturally makes the ribbon front weighted, giving recent price action greater importance than older price action. The undulating curls of the ribbon allow a trader to see key convergences and divergences. The ribbon often narrows before a major price movement. The background is lightly colored to indicate when one average of MA's crosses the other average (1+2+3+4+5) crosses (6+7+8+9+10). Like a standard MA cross, but a little more sophisticated. The most visually pleasing is SMMA-RMA, but the more effective in anticipating the market is EMA and HMA. USAGE Visualizing convergence and divergence as the ribbon widens with sudden price movement and narrows during consolidation Visualizing general trends as the flipping over of the ribbon represents a general trend change Setting possible entry and exit points through the width and direction of the ribbon VARIATIONS You can select many types of MA's, such as SMA,EMA,HMA,VWMA... and a couple of others. The most effective seem to be EMA,HMA, and VWMA SUGGESTIONS Let me know if you'd like some other features added to this indicator, such as additional MA's or something else. I can also customize it for a specific application.
Pine Script®指標
由cryptofilio提供
1
Binary Sniper StrategyBy using this indicator you can better view the MA indicators used by this strategy, as well as specifically waiting for the cross and close which gives you easy access to an arrow as one of the confirmations and having the ability to setup alerts on the flip so you can easily monitor multiple pairs at the same time, the Bands give you a general idea of the market flow, and volatility. The Long Term EMA gives you higher probability trend for a easier binary clear, potentially without the need for a rollover. This is best used alongside: - Stochastic Indicator with the Settings of (5,3,3) The confirmations are : - Are we Above or Below the Long Term Trend EMA - (Above = 1 Confirmation for the Buy, Below = 1 Confirmation for the Sell) - Are we at the Low or the High of the Bands ( Low = 1 Confirmation for the Buy, High = 1 Confirmation for the Sell) - Are the MAs crossed up or down( Cross Up = 1 Confirmation for the Buy , Cross Down = 1 Confirmation for the Sell) - Are we coming out of the Oversold or Overbought areas on the Stoch (Oversold = 1 Confirmation for the Buy, OverBought = 1 Confirmation for the Sell) - Is the 15 min in Confluence ? = (Yes = 1 Confirmation in either direction) Once You have at least 3 Confirmations one of them having to be the MA cross arrow popping up, you have a valid trade setup on the open of that candle, for Binary options, I personally like to wait a little bit after the arrow candle opens to potentially get a slight pullback so that i can buy/sell with a slightly better entry that i don't have to rollover on, I usually aim for 3 min clears, but sometimes i have to rollover.
Pine Script®指標
由Snipersquad提供
8
Trend Quality cross [LM]Hi Guys, I would like to introduce you Trend quality cross indicator. The idea orginallybcomes from @kruskakli and his indicator "Trend Quality" so shout-out to him I have modified the indicator to display just binary option buy/sell and display diff percentage from previous cross. Also there is a difference that I have double smoothed tq indicator results to give less false signals. and also added for the same reason like in my other indicator vpci ma cross base line and conversion line from ichimoku. Any suggestions are welcomed
Pine Script®指標
由lmatl提供
2
WaveMasterThis indicator created with combination of 2 different indicator, momentum and Inchimoku Kinko Hyo. It replicates the result of Moving Average(5) added to RSI indicator window to identify the end of a trend and reversal, under strict condition and unique application on mobile phone. But with more accuracy and reduced false signals. Tested markets: DOWJONES/US30, S&P500, CURRENCY, Commodities: GOLD, BRENT & WTI. For Intraday & Swing Trader. How to use: Two key signal levels, Overbought / Oversold level. 1. When the line touch Overbought level, go Short. 2. When the line touch Oversold level, go Long. Timeframe: M5, H1 & H4 **After the line cross the signal level. You can wait for more confirmation such ABC pattern, engulfing or additional MA crossing. When to execute entry? For example: So when line touch the signal level lets say it a Long signal, wait for ABC pattern, when you saw a complete wave of A and it making wave B, use Fibonacci Retracement from the first point (B)(High) to second point (A)(Low), set BUY LIMIT at 50% of Fibonacci Retracement level for smaller risk, or wait for wave C to break above the HIGH of wave B at 100% of Fibonacci Retracement level to instantly BUY at current price to confirm the ABC pattern. When to exit your position? 1) Exit your trade when the line touch Overbought level, indicates the bullish is weakens. 2) Exit your trade when the price touch Fibonacci Retracement level of point B to A, at these 3 level 161.8% / 261.8% / 423.6% (Take Profit level)
Pine Script®指標
由UnknownUnicorn4084728提供